Volvo - 700 82-92
Only with VDO speedometer Gear and Pod Style
To repair the odometer permanently you will need both the 26 tooth gear and the 15 tooth pod.
Volvo - 700 26 Tooth Odometer Gear
$25.00
Only for VDO speedo. If you have a Yazaki speedo (metal spacing on gauge face between trip meter numbers) then the gears are not your concern as it will be an electronic failure. This gear rides on a large pod gear. The two gears together operate the odometer. If you only want to repair the odometer once then replace both at the same time. The diameter of this gear is 11.00 mm or .433"
Volvo - 700 15 Tooth Large Odometer Pod
$25.00
The original pod was made in two parts, the disc and then the urethane gear. We manufacture the replacement pod as one piece. This ensures a stronger part with no failure possible. You will need to count the teeth of your old pod before ordering. Recommended to also order gear listed above.
Only with VDO speedometer Three Gear Set
Volvo - 700 VDO Three Odometer Gear Set
$65.00
Select a style:
with 12 inner tooth count
with 13 inner tooth count
with 14 inner tooth count
with 15 inner tooth count
with 16 inner tooth count
with 17 inner tooth count
with 18 inner tooth count
with 19 inner tooth count
with 21 inner tooth count
Electronic Tachometer with Odometer Gear Set. E1 gear is always a 12-tooth drive gear, E2 the second gear is always 48x12 with a flat back, and black, E3 gear has 48 teeth on the outside, and then between 12 and 21 teeth on the underside gear, original gear is amber in color. (Must count teeth on original gear before ordering).
{If you cannot count the teeth on the main gear, then count the teeth of the next gear it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12}
Volvo - 700 VDO Individual Odometer Gears
$25.00
Select a style:
E1 = 12 tooth drive gear
E2 = 48 x 12 flat back
E3 = 48 x 12 with neck on the top
E3 = 48 x 13 with neck on the top
E3 = 48 x 14 with neck on the top
E3 = 48 x 15 with neck on the top
E3 = 48 x 16 with neck on the top
E3 = 48 x 17 with neck on the top
E3 = 48 x 18 with neck on the top
E3 = 48 x 19 with neck on the top
E3 = 48 x 21 with neck on the top
E1 gear is always the 12 tooth drive gear, E2 is always the second gear 48x12 with flat back, E3 gear has 48 teeth on the outside and then between 12 and 19 teeth on the underside gear, original gear is amber in color. (Must count teeth on original gear before ordering).
{If you cannot count the teeth on the main gear then count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12}
